HNE130 Hydraulic Excavator is self-developed advanced wheel excavators that combine the Japanese and South Korean technology, which is 360°rotation.
The main product features are as follows:
A. The structure parts of the excavators use top quality domestic Q345 steel with smoothly weld appearance. Each weld should pass the defect detecting test and the welding technology matches the international standards, which greatly increase the structural strength, ensure the safety of driving and construction. Shot blasting technology is applied to the machine, which increase the adhesion of the paint, delay the component corrosion, improve the working life of parts correspondingly, remain the beautiful appearance, and maintain the performance as well.
B. The engine of the excavators, Cummins 4BTAA3.9 or Yuchai YC4B100G diesel engine ,can realize the engine automatically increase (decrease) speed fuction through the electronic control system .When choosing the function of automatic idle control ,the electric control system can judge from the working condition of the excavator (with or without operating ) to adjust the speed of the engine automatically according to the set reaction time ,so that it can be reduce fuel consumption and power loss. When the machine waits standby ,the engine will reduce speed automatically through the increase (decrease) speed system ,at the same time the main pump also reduce the flow rate by negative flow system ,and thus minimize the power consumption .The electric control system enable double supercharging of the main overflow valve, thereby improving the opening pressure of main overflow valve so as to increase the power by around 10% .The engine is especially suitable for the excavator to meet the needs of temporary reinforcement ,and achieve some special operating conditions.
C. HNE130 Hydraulic Excavator use Japanese produced pump, Korean multi-way valve and rotary reducer. The hydraulic system is of high reliability, and fine workmanship, and satisfies the operation requirements of harsh working conditions.
D. HNE130 Hydraulic Excavator adopt international leading mechanical running gear, so the machines are suitable for long distance transfer and convenient construction. Advanced mechanical walking, fast running speed, saving the transportation cost. Hydraulic power steering enables the car to work portable and flexible with stable operation.
E. HNE130 Hydraulic Excavator use EATON joints (the world’s top 500 company) and Japanese YOKOHAMA high-pressure hoses (top global brands). The high-pressure hoses resistance, super soft, and the joint is anti-seismic and loose resistance, and suitable for the excavator to work smoothly under various working conditions.
F. Standard HNE130 Hydraulic Excavator is equipped with hydraulic breaking system and quick-change connector, which meet the road construction, mine development and the construction requirements.
G.The advanced CPU monitors the whole car comprehensively, which can provide timely remind when fault occurs, and protect the starter motors intelligently. The design f the excavator is fully comply with the needs of humanity.
Parameter of 13 Ton Wheel Excavator
Main specifications | ||||
Model | Unit | HNE130 | ||
Operating weight | kg | 12600 | ||
Standard bucketcapacity | m3 | 0.5-0.7 | ||
Engine | Type | Engine Model | / | 4BTAA-C115 |
Direct injection | / | √ | ||
Four strokes | / | √ | ||
Water cooling | / | √ | ||
Turbo charged | / | √ | ||
Air to air intercooler | / | √ | ||
No.of cylinders | / | 4 | ||
Rated power/speed | KW/r/min | 85/2200 | ||
Max.torque/speed | N.m | 530/1300 | ||
Displacement | L | 3.922 | ||
The main performance | Travel speed | Km/h | 5.3/3.1 | |
Max.gradeability | %/° | 70/35 | ||
Swing speed | r/min | 12.4 | ||
Ground pressure | KPa | 40 | ||
Bucket digging force at power max | KN | 92.7 | ||
Arm crowd force at power max | KN | 67.6 | ||
Hydraulic system | Main pump | Two plunger pump | ||
Rate flow | L/min | 2×130 | ||
Max pressure of system | MPa | 31.4/34.3 | ||
Pilot press setting | MPa | 3.92 | ||
Oil capacity | Fuel tank capacity | L | 200 | |
Hydraulic tank capacity | L | 120 | ||
Engine lubrication | L | 19 |
Dimensions Unit mm | ||
Model | HNE130 | |
A | Overall length | 7750 |
B | Overall width | 2500 |
C | Overall height | 2760 |
D | Overall width of upperstructure | 2490 |
E | Track length | 3460 |
F | Overall width of undercarriage | 2460 |
G | Standard track shoe width | 500 |
H | Track length on ground | 2745 |
I | Track gauge | 1960 |
J | Clearance under counter weight | 880 |
K | Ground clearance | 395 |
L | Tail swing radius | 2290 |
Working Range Unit mm | ||
Model | HNE130 | |
A | Max.digging height | 8630 |
B | Max.dumping height | 6020 |
C | Max.digging depth | 5565 |
D | Max.digging depth of cut for | 5365 |
E | Max.vertical wall digging depth | 5115 |
F | Max.digging reach | 8175 |
G | Max.digging reach | 8050 |
H | Min.swing radius | 2115 |