|Tyres Qty,front/rear(X-drive wheels)||4\2|
|Dimension||Mast/carriage tilt angle(front/rear)||Degree（°）||6\12|
|Mast height(fork lowering)||h1（mm）||3100|
|Mast lifting height||h3（mm）||3000|
|Height to head guard(height to cab)||h6（mm）||3000|
|Overall Length(with forks)||l1（mm）||6055|
|Fork front vertical surface to the rear end of the vehicle||l2（mm）||4855|
|Fork carriage width||b3（mm）||2200|
|Mast min ground clearance(with load)||m1（mm）||225|
|Wheelbase center min ground clearance(with load)||m2（mm）||350|
|Travel speed(with load/without load)||km/h||23/26|
|Performance||Max.lifting speed(with load/without load)||mm/s||220/270|
|Max.Lowering speed(with load/without load)||mm/s||450/300|
|Grade ablity(with load/without load)||％||20/22|
|Driving brake||Hydraulic clamp disc|
|Engine||Engine brand/model||Optional one||Yuchai engine|
6.494L 110KW 2200rpm
|Optional two||Dongfeng Cummins|
4.5L 97KW 2200rpm
|Attachments working pressure||Mpa||16|
|Attachments using oil amount||l/min||40|
Socma Forklift Related Information and News Share:
Model and configuration
The choice of models and configurations generally starts from the following aspects:
Folding job function
The basic operation functions of forklifts are divided into horizontal handling, stacking/picking, loading/unloading, and picking. According to the operational functions that the enterprise wants to achieve, it can be preliminarily determined from the models described above. In addition, special operating functions will affect the specific configuration of the forklift, such as paper rolls, molten iron, etc., which require the forklift to install attachments to complete special functions.
The operating requirements of forklifts include general requirements such as pallet or cargo specifications, lifting height, operating channel width, and gradeability. At the same time, it is also necessary to consider operating efficiency (different models have different efficiency), operating habits (such as accustomed to sitting or standing), etc. Requirements.
Folding operating environment
If the company needs to move the goods or the warehouse environment has environmental protection requirements such as noise or exhaust emissions, it should be considered when selecting models and configurations. If it is in a cold storage or in an environment with explosion-proof requirements, the configuration of the forklift should also be cold storage or explosion-proof. Carefully examine the locations that the forklift needs to pass through, and imagine possible problems, such as whether the door height affects the forklift when entering and exiting the warehouse; when entering and leaving the elevator, the impact of the elevator height and load on the forklift; when working upstairs, the floor bearing Whether it meets the corresponding requirements, etc.
When selecting a model and determining a configuration, it is necessary to describe the working conditions in detail to the forklift supplier and conduct an on-site survey to ensure that the forklift purchased fully meets the needs of the enterprise. Even after completing the analysis of the above steps, there may still be several models that can meet the above requirements at the same time. At this time, you need to pay attention to the following aspects:
Different models have different work efficiencies, so the number of forklifts and the number of drivers required are also different, which will cause a series of cost changes. For details, see the discussion on cost in the performance evaluation section of this article.
If the forklift is operating in the warehouse, the aisle width required for different models is different, and the lifting capacity is also different, which will bring about changes in the warehouse layout, such as changes in the storage volume of goods.
Changes in vehicle models and their numbers will have an impact on many aspects such as fleet management.
Different models have different market holdings, and their after-sales guarantee capabilities are also different. For example, low-drive three-way stacker trucks and high-drive three-way stackers belong to the narrow aisle forklift series, and can be used in very narrow aisles (1.5~2.0 M) Complete stacking and picking up. However, the former cab cannot be lifted, so the operating vision is poor and the work efficiency is low. Because the latter can fully cover the functions of the former, and the performance is more outstanding, the market sales of the latter in Europe are 4 to 5 times more than the former, and in China it is more than 6 times. Therefore, most suppliers focus on the development of high-drive three-way stacking forklifts, while low-drive three-way stacking forklifts are only used in small tonnage and low lifting heights (usually within 6 meters). When market sales are low, its service capabilities such as the number of after-sales service engineers, engineer experience, and spare parts inventory levels will be relatively weak.
After comprehensive evaluation of the above aspects, the most reasonable plan should be selected.