Parameters:
Model | Unit | HNF-300H | ||
Performance | Rated load | 30000 | ||
Load center | 1250 | |||
Mast tilt angle (front/rear) | º | 3/4 | ||
Overall dimensions | Length | mm | 9590 | |
Width | mm | 3800 | ||
Height | mm | 6470 | ||
Mast lifting height | mm | 8100 | ||
Fork size (L*W*H) | mm | 2440X340X125 | ||
Min. turning radius | mm | 7260 | ||
Max. travel speed (with load) | Km/h | 25 | ||
Lifting speed (with load) | mm/s | 260 | ||
Grade ability (with load) | % | 20 | ||
Weight | Kg | 45000 | ||
Tyre | Front | 4X16.00-25-32PR | ||
Rear | 2X16.00-25-32PR | |||
Wheel tread | Front | mm | 2800 | |
Rear | mm | 2450 | ||
Wheelbase | mm | 4800 | ||
Min. ground clearance | mm | 400 | ||
Weichai Engine | Model | WP10G240E341 | ||
Rated power/rotate speed | KW/r.pm | 178/2200 | ||
Cylinder No. | 6 | |||
DF Cummins Engine(optional) | Model | QSC8.3-C260 | ||
Rated power/rotate speed | KW/r.pm | 194/2200 | ||
Cylinder No. | 6 |
30ton forklift (Model HNF-300H)
Main Configuration and Advantages of SOCMA 30tons Forklift:
1,Engine: optional diesel engine
WEICHAI
CUMMINS
2, Transmission and Torque converter, adopts Hangchi ZF technology electronic control transmission. The torque converter is stable and reliable. The gearshift is smooth.
3, Driving axle: SOCMA brand driving axle is designed with the same structure as Kessler. It is with first stage screw reducer and planetary driving wheel side reduction device.
It is designed for special working condition of forklift. The wheel shell resistance strength is high. It is with good supporting and good radiation. The driving axle is clamp disc brake, it is a high cost effectiveness driving axle with reliable performance and stable quality.
4, Brake system: The forklift is with clamp-disc brake, the braking force is reliable and stable, booster pressure. The braking performance is reliable in any working condition, it is easy to maintain
5, Radiation system: Adopts 3-row water tank, with reliable quality and good radiation. The good radiation can can guarantee that that all of the parts of different systems can work in good temperature condition, reduces the failure of the forklift, enhance the reliability.
6, Wheel system: Adopt GKN wheel rim and high-reliability non spoke plate structure, which can meet different heavy duty working condition.
7, Chassis: Adopt double beam box-type chassis (same as Konecranes). The chassis is with good rigidity and strength, which guarantee the high performance of forklift chassis. The chassis has been tested in the following aspects: Stiffness verification, strength testing, fatigue and life-span assessment, . The FEA analysis is widely used, which help the optimization of structure design, guarantee the safety operation of the products
8, Hydraulic system: Adopt domestic advanced hydraulic parts, with joystick control as standard.
9, Truck standard configuration: with shock absorbing cab, hydraulic fork positioner, rear-view monitor, air conditioner and fan as standard configuration.
Strong points of SOCMA 30tons Forklift:
1, The thermal balance temperature of the engine and transmission is good: The engine water thermal balance temperature will keep 105℃ below, transmission oil thermal balance temperature will keep 90℃ under the environmental working temperature of 40℃, which can solve the problem of oil-leakage, water-leakage causing by aging of seal, and other failure such as engine early wearing, power transmission failure.
2, Optimized mast design, with wide view: Optimized mast with small clearance, compact structure, which provide wide front view for the operator. It is good for safe-working improvement and the increasing of the work efficiency.
3, Good cost effectiveness and stable performance: China Domestic configuration with the same performance of imported configuration, with good feedback after launching into the market