SOCMA HNF250 , forklift with 25 ton load capacity is popular used to carry container , stone block , coil steel ect.
Feature
1. Compact body structure, Optimized mast design, with wide view: Optimized mast with small clearance, compact structure, which provide wide front view for the operator. It is good for safe-working improvement and the increasing of the work efficiency.
2. Well organized engine cooling system with water & air circulation maintain temperature stable at around 90℃, transmission oil temperature below 40℃, thus prolong lifespan of oil seal ,reduce risk of oil-leakage, water-leakage or moving part wearing in engine, transmission box.
3. Low fuel onsumtion rate and low maintenance cost that bring high ROI .
Specification Forklift HNF250
Model HNF250 | ||||||||
Performance | Load capacity | kg | 25000 | |||||
Load center | mm | 1250 | ||||||
Maximum fork height (h4) | mm | 3500 | ||||||
Lifting speed(wz/wo load) | mm/s | 260/270 | ||||||
Mast tilt angle (forward/backward) | º | 6/12 | ||||||
Max. Travel speed (full load/without load) | kmh | 26/30 | ||||||
Turning radius(outside) | mm | 6700 | ||||||
Grade ability (wz/wo load) | % | 20/21 | ||||||
Dimension | Overall length (wz/wo fork) | mm | 9190/6745 | |||||
Fork size (L*W*T) | mm | 2440*300*110 | ||||||
Overall width | mm | 3050 | ||||||
Width of fork carriage | mm | 3050 | ||||||
Overall height | mast lowed | mm | 3860 | |||||
overhead guard | mm | 3510 | ||||||
Wheelbase | mm | 4400 | ||||||
Ground clearance (wz load) | wheelbase center | mm | 420 | |||||
mast lowered point | mm | 300 | ||||||
Weight | Total weight | kg | 35000 | |||||
Tire
| numbers & size Front | 4*14.00-24/28PR | ||||||
numbers & size Rear | 2*14.00-24/28PR | |||||||
Wheel tread | Front | mm | 2200 | |||||
Rear | mm | 2390 | ||||||
Brake | Service | Air over Hydraulic clamp disc brake | ||||||
Parking | Spring press clamp disc brake | |||||||
Transmission | Manufacturer /Type | ZHONGNAN/ Automatic power-shift | ||||||
Number of speed | Forward2/Reverse1 | |||||||
Engine Diesel | Option1. | Manufacturer/Model | WEICHAI | WP10G220E343 | ||||
Rated power/rotate speed | kw/r.pm | 162/2000 | ||||||
Option2. | Manufacturer/Model | CUMMINS | QSB8.3-C240 | |||||
Rated power/rotate speed | kw/r.pm | 179/2200 | ||||||
Optional attachment | Front tilting bucket use to transport molten metal | |||||||
