45 Tons 45t Heavy Forklift FD450

45 Tons 45t Heavy Forklift FD450

HNF-450 Rated load: 45,000 kgs Load center:1200 mm Operating weight: 53,000 kgs Wheel base: 5,500 mm Email: claire@socmachinery.com
Chat Now

Product Details

Email: claire@socmachinery.com  


45 tons 45t heavy forklift brand SOCMA vs Kalmar, Hyster, Konecranes, Sany, TCM, CVS 


There will be so many forklifts, and the first cooperation with the boss may be a friend introduction, and it may be technically perfect, but it is not easy to cooperate for a long time or to continue to have a continuous work. So how can the forklift get the appreciation of the boss, so that the boss feels that you are responsible for careful use?

 

 

First of all, the following work should be done when picking up a machine.

 

First, ask the boss or before the maintenance of hand-held equipment, including maintenance items and time, it is best to do their own equipment inspection.

 


45 tons 45t heavy forklift brand SOCMA vs Kalmar, Hyster, Konecranes, Sany, TCM, CVS 


Second, ask the boss or the previous machine, is there any special attention to this forklift? For example, the machine is easy to derailment, run off and so on. Clearly, the performance of forklifts can avoid some troubles and even accidents.

 

Third, understand the construction site is special: in general, there will be a lot of special conditions in the municipal construction, the substreet pipes, cables make up, a little carelessness will dig tap water pipes, cables and other conditions, such things may cause huge losses.

 

 


45 tons 45t heavy forklift brand SOCMA vs Kalmar, Hyster, Konecranes, Sany, TCM, CVS 

After formally taking over the job, we should adhere to the following tasks:

 

First, according to the maintenance project and time of the forklift, do a good job of maintenance; remember to do a good job before the work, and do not forget to make the butter. After work, the machine should be checked again, even if it is not his own forklift, it is also his own partner, and it is responsible for the safety of yourself.

 

Second, there are things to ask for leave early contact with the boss, do not suddenly put dove.

 

Third. Any problems with the machine or construction site should be reported to the boss immediately.

 

 

 

To put it plainly, just like being a human being, we must treat each other sincerely and respect each other. We should not only have technology, but also be careful and sincere, and do good to others.


Email: claire@socmachinery.com 


45 tons 45t heavy forklift brand SOCMA vs Kalmar, Hyster, Konecranes, Sany, TCM, CVS 


 ItemItem details  Unit  
HNF-450
FeaturesRated LoadQ(t)45
Load centerc(mm)1200
Wheelbasey(mm)5500
WeightWeightkg53000
ChassisTyre Specs.:Front
18.00-25-40PR
Tyre Specs.:Rear
18.00-25-40PR
Tyres Qty,front/rear                                   (X-drive wheels)
4\2
Wheel tread:Frontb10(mm)3030
Wheel tread:Rearb11(mm)2786
DimensionMast/carriage tilt angle(front/rear)Degree(°)5\10
Mast height(fork lowering)h1(mm)4625
Mast lifting heighth3(mm)4000
Max.lifting heighth4(mm)6560
Height to head guard(height to cab)h6(mm)3900
Overall height(with forks)l1(mm)10400
Fork front vertical surface to the rear end of the vehiclel2(mm)8000
Overall widthb1/b2(mm)4160
Fork dimensions/e(mm)2400X300X135
Fork carriage widthb3(mm)3400
Mast min ground clearance                (with load)m1(mm)300
Wheelbase center min ground clearance(with load)m2(mm)460
Min.Turning radiusWa(mm)8000
Travel speed(with load/without load)km/h22/25
PerformanceMax.lifting speed                                         (with load/without load)mm/s200/250
 Max.Lowering speed                             (with load/without load)mm/s300
TractionN250000
Gradeablity                                          (with load/without load)25
Driving brake
Oil-cooled multiple wet disc

Engine  brand/modelOptional oneWeichai engine
Engine
WP12G340(250kW III)
Optional twoXi'an Cummins

QSM11 250kW
Cylinder No.6
OthersTransmission gears(Front/rear)
Torque convertor


Inquiry