Rotating telehandler or roto-telehandler, HNTR40 is a multi-purpose rough terrain forklift. It is creative rotate telehandler that is suitable for construction site and some industry area. HNTR40 adopts diesel engine, hydrostatic transmission, pilot control, 4WD full wheels driving, rear wheel steering with out trigger, hydraulic stabilizer for boom placing, stretching and withdrawing, lifting height 15m, rated load capacity 4tons, 360 degree rotate chassis, Max horizontal reach 10500mm(front end of front wheel to load center).It can be used as telescopic forklift loader, crane loader or working platform,this 360 degree rotating telehandler can be working in tunnel and other project
construction working site
.
HNTR40 Rotating telehandler
rotating telehandler in customer site,climb a long slope
rotating telehandler working in tunnel
Main application:
The construction site
The unloading of construction materials and short-distance transport, construction materials will be directly put into the operation point, or to the car crane, tower crane feeding.
Handle all kinds of materials on site and clean up the site.
Use cargo forks and spreader to carry building materials of block, strip and non-standard shape;
Use hoppers to transport bulk materials and level the ground;
Use aerial working platform for aerial installation;
Installing curtain wall with glass suction cup;
And so on.
Industrial enterprise
Handle all kinds of materials on rough ground.
Agriculture and animal husbandry
Forage bag handling, forage chopping, forage feeding, excrement cleaning.
Straw and straw are packed and transported Channel application: hoisting and lagging jack.
360 degree rotating telehandler,The construction site
Telescopic fork assembly Handler
Small telescopic boom fork-loading
Lifting height of 4-6 m, load capacity of 1.5-2.5 t, 2 or 4 wheel drive, diesel drive.
Universal telescopic boom fork loading
Lifting height of 7 m -17 m, load capacity of 3 t -4 t, 4 wheel drive, 3 steering modes (2 wheel steering, 4 wheel steering, crab steering), with or without auxiliary support legs, with or without body balance, diesel driven.
Rotating telescopic boom fork-loading
Lifting height of 14m - 30m, load capacity of 3.2T - 5.0t, body of 400° or continuous rotation, 4 wheel drive, 3 steering modes (2 wheel steering, 4 wheel steering, crab steering), with auxiliary support legs, diesel drive.
Heavy telescopic boom fork-loading
Lifting height 6-10 m, load capacity 6-22 t, 4-wheel drive, three steering modes (two-wheel steering, four-wheel steering, crab steering), with body balance, diesel drive.
Agricultural telescopic boom fork-loading
Lifting height 5 m -10 m, load capacity 2.3-4.5 t, 4 wheel drive, three steering modes (two wheel steering, four wheel steering, crab steering), with or without body balance, diesel driven.
Performance |
Technical data | |
Basic parameter |
Max. Lifting height (with out trigger) |
15m |
Rated load capacity (lifting) |
4000kg | |
Max. Horizontal reach |
10.5m | |
Rated load @ Max. Horizontal reach (with out trigger) |
800kg | |
Load center |
500mm | |
Operating weight (unloaded with fork) |
16500 kg | |
Max. Travailing speed (km/hour) |
25 km/h | |
Swinging speed |
3 rpm(1500rpm) | |
Transmission system |
Transmission type |
Hydraulic static transmission |
Hydraulic (high speed / low speed) |
2 / 2 | |
Transmission gears |
2F/2R | |
Gradeability |
30% | |
Traction force |
80kN |
System capacity | Hydraulic oil tank capacity | 300L |
Fuel tank capacity |
200L | |
Engine |
Model |
Cummins QSB3.9-C125-30 |
Rated power |
93kW/2200rpm | |
Torque |
480 Nm / 1350r/min | |
Fuel type |
Diesel | |
Emission standard | National Ⅲ | |
Air inlet cooling |
Air-air intercooler | |
Hydraulic system |
Pressure |
28 MPa |
flow |
300 L/min | |
Steering system |
Steering gear type |
load sensing full hydraulic steering |
Pressure |
16 MPa | |
Rear axle steering type |
Transverse hydraulic cylinder steering structure | |
Steering angle |
40° |
Brake type | Service brake | Clamp-disc brake |
Brake air pressure |
0.684-0.785 MPa | |
Parking brake |
Air push drum brake | |
Main dimension |
Overall height |
3300mm |
Overall width |
2570mm | |
Overall length(with fork) |
7330mm | |
Wheel base |
2800mm | |
Front wheel tread |
2030mm | |
Rear wheel tread |
2030mm | |
Ground clearance (out trigger) |
350mm | |
Turning radius (out side) |
≥4800mm | |
Operating position |
Central | |
Seating type |
Car type | |
Aerial working platform |
Length*width*height |
1200×800×970mm |
Out trigger type | Hydraulic out trigger No. | 2F/2R |
Working boom |
Telescopic working boom |
3-setion |
Fork |
Length*width*thickness |
1000×122×50mm |
Max. Distance between two forks |
710mm | |
Front/Rear tilt degree |
12°/ 120° | |
Standard tire(inflatable) |
(Front/Rear) Wheel Number |
2/2 |
(Front/Rear) driving wheel Number |
2/0 | |
(Front/Rear) tire dimension | 45×16-20 (36PR) |