35T Heavy Duty Forklift For Heavy Cargo Transport
Strong points of SOCMA 35tons Diesel Forklift:
1, The thermal balance temperature of the engine and transmission is good: The engine water thermal balance temperature will keep 105℃ below, transmission oil thermal balance temperature will keep 90℃ under the environmental working temperature of 40℃, which can solve the problem of oil-leakage, water-leakage causing by aging of seal, and other failure such as engine early wearing, power transmission failure.
2, Optimized mast design, with wide view: Optimized mast with small clearance, compact structure, which provide wide front view for the operator. It is good for safe-working improvement and the increasing of the work efficiency.
3, Good cost effectiveness and stable performance: China Domestic configuration with the same performance of imported configuration, with good feedback after launching into the market
Main specifications for 35t forklift
Configuration | Model | Unit | CPCD350 | |
Vehicle configuration | HNF-350 | |||
Performance | Rated load | 35000 | ||
Load center | 1250 | |||
Mast tilt angle (front/rear) | º | 6/12 | ||
Overall dimensions | Length | mm | 9700 | |
Width | mm | 3320 | ||
Height | mm | 4010 | ||
Mast lifting height | mm | 3500 | ||
Fork size (L*W*H) | mm | 2440X340X125 | ||
Min. turning radius | mm | 7260 | ||
Max. travel speed (with load) | Km/h | 25 | ||
Lifting speed (with load) | mm/s | 260 | ||
Gradeability (with load) | % | 20 | ||
Weight | Kg | 43000 | ||
Tyre | Front | 4X16.00-25/32PR | ||
Rear | 2X16.00-25/32PR | |||
Wheel tread | Front | mm | 2400 | |
Rear | mm | 2450 | ||
Wheelbase | mm | 4800 | ||
Min. ground clearance | mm | 400 | ||
DF Cummins Engine | Model | 6CTA8.3-C260 | ||
Rated power/rotate speed | KW/r.pm | 194/2200 | ||
8.3L | ||||
Scheduled maintenance regarding 35t heavy duty forklift
Each working 8 hours-35t counter balanced forklit
● Visual check around the machine if is unusual ,oil spills.
● Check the engine oil level、hydraulic oil level、transmission oil level、brake fluid and radiator
antifreezing solution（water）.
● Check pin shaft sleever and rotating parts with lubricating grease.
● Check the lighting and instrumentation.
● Check the tire pressure and damage condition.
Each working 50 hours or one week-35 tons forklift
● Tighten front and rear drive shaft coupling bolts.
● Check the gearbox oil level.
● Check the brake stroke gap.
● Check the emergency and parking brake, if improper should adjust.
● Check the tire pressure and damage condition.
● Inject butter.in mast hinge joint ,shafts, chains, and other bearing pressure.
Each working 125 hours or half month-SOCMA heavy duty forklift
● Clean the engine cylinder head and torque converter oil cooler.
● Check the battery level, the joints coated with thin layer of Vaseline.
● Check the hydraulic oil tank.
Each working 250 hours or one month-35t cargo lifter
● Check tightening torque of the rim fixed bolts.
● Check the oil level front and rear the bridge.
● Check the weld line and bolt of mast device, frame, rim if crack, loose.
● Replace engine oil (according to oil quality and engine usage conditions).
● Check the engine fan belts, compressors and generators belt if tightness, damage.
● Adjust the foot brake and parking brake.
● Drain the water tank.
Each working 600 hours or three months-35t heavy cargo forklift
● Check the transmission fluid if is clean, clean oil filter, change new oil and clean the transmission
back shell.
● Tighten front and rear axles and the frame bolts.
● Engine oil must be replaced, replace the oil filter.
● Check the engine valve clearance.
● Clean oil filter of diesel fuel tank refuel and oil absorption.
● Clean oil filter of the hydraulic tank refuel, return oil and oil absorption.
Each working 1200 hours or half year-35t diesel forklfit
● Replace the transmission hydraulic transmission oil, cleaning oil filter, oil pan.
● Replace the engine fuel filter.
● Check the variety of thermometers, pressure gauges.
● Check fastening condition of the engine intake and exhaust pipe.
● Check the operation case of the engine.
● Replace the hydraulic oil, clean the fuel tank strainer, suction tube.
● Replace the front and rear axle gear oil.
Each working 2000 hours or one year
● Check the foot brake and parking brake, if necessary, disassemble, check wear condition of
friction plate.
● Check the brake booster seal, spring components, replacement of brake fluid, check brake
sensitivity.
●By measuring t natural subsidence of cylinder, check the distribution valve, the working cylinder
seal.
● Check the steering system flexibility.
Pictures of SOCMA 35t diesel forklift:
