HNF-350
Rated load: 35,000 kgs
Load center:1250 mm
Operating weight: 43,000 kgs
Wheel base: 4,800 mm
1, adopt Cummins, Weichai, Yuchai turbocharging engine, powerful, energy conservation, environmental protection, satisfies the requirement of high efficiency operation.
2, adopt double pump confluence working hydraulic system, greatly reduce fuel consumption, energy consumption. Hydraulic system equipped with oil radiator and back pressure protection device, ensure the machine heat balance
3, front axle adopt heavy duty type driving axle, enlarge size of axle housing, hub and bearing, spiral bevel gear and wheel planetary wheel deceleration increasing twist, steel structure bridge shell support, increase the load capacity and service life.
4, Variable speed control valve matched with neutral starter, the machine start more secure.
5, using speed limit valve and pressure selector valve, reduce the hydraulic system impact, can lower the mast to the ground when engine flame out
35 Ton Stone Forklift Maintenance 7
（1）Inspect tyre pressure and clear away sundries inside the tyre.
（2）Inspect oil volume of oil tank, whether have leakage of tube and connector.
（3）Inspect water level of outfire water tank.
（4）Inspect the working condition of instrument, light, horn etc.
（5）After finishing inspecting of above items, start engine, check the working condition whether normal of engine, transmision system, braking system and hydraulic lifting & lowering system.
Parameter of 35 Ton Stone Forklift
Item | Item details | Unit | |
HNF-350 | |||
Features | Rated Load | Q（t） | 35 |
Load center | c（mm） | 1250 | |
Wheelbase | y（mm） | 4800 | |
Weight | Weight | kg | 43000 |
Chassis | Tyre Specs.:Front | 16.00-25-32PR | |
Tyre Specs.:Rear | 16.00-25-32PR | ||
Tyres Qty,front/rear(X-drive wheels) | 4\2 | ||
Wheel tread:Front | b10（mm） | 2400 | |
Wheel tread:Rear | b11（mm） | 2450 | |
Dimension | Mast/carriage tilt angle(front/rear) | Degree（°） | 6\12 |
Mast height(fork lowering) | h1（mm） | 4010 | |
Mast lifting height | h3（mm） | 3500 | |
Max.lifting height | h4（mm） | 5760 | |
Height to head guard(height to cab) | h6（mm） | 3860 | |
Overall height(with forks) | l1（mm） | 9700 | |
Fork front vertical surface to the rear end of the vehicle | l2（mm） | 7150 | |
Overall width | b1/b2（mm） | 3320 | |
Fork dimension | s/e（mm） | 2440X340X125 | |
Fork carriage width | b3（mm） | 3000 | |
Mast min ground clearance(with load) | m1（mm） | 400 | |
Wheelbase center min ground clearance(with load) | m2（mm） | 460 | |
Min.Turning radius | Wa（mm） | 7260 | |
Travel speed(with load/without load) | km/h | 25/28 | |
Performance | Max.lifting speed(with load/without load) | mm/s | 260/280 |
Max.Lowering speed(with load/without load) | mm/s | 250/180 | |
Traction | N | 22000 | |
Gradeablity(with load/without load) | ％ | 20/20 | |
Driving brake | Hydraulic clamp disc | ||
Engine | Engine brand/model | Optional one | Weichai engine |
WO10G240E341 | |||
Optional two | Dongfeng Cummins | ||
QSC8.3-C260 | |||
Cylinder No. | 6 | ||
Others | Transmission gears(Front/rear) | 2\1 | |
Attachments working pressure | bar | 180 | |
Attachments using oil amount | l/min | 80 |