32T Counter Balanced Diesel Forklift

32T Counter Balanced Diesel Forklift

32T Counter Balanced Diesel Forklift
Engine: Cummins
Transmission: Electric type
Load Center: 1250mm
Fork length: 2440mm
Lifting height: 3500mm
Mast type: duplex wide view mast
With full cabin and AC
With sideshifter and fork positioner
Chat Now

Product Details

32T Counter Balanced Diesel Forklift


Main Configuration and Advantages of SOCMA 32tons Diesel Forklift: 

1, Power of 32t diesel forklift: Adopt Turbo-charge engine, Engine system adopt Int. Advanced fuel system, which features with low fuel consumption, low noise, with strong power and stable out-put, emission can be adjusted with the requirement of different market, the Max. Emission can reach national III standard. The engine widely used in different working condition, with high cost effectiveness and reliable after-sales service to guarantee the usage of the engine.  The accessory such as filter and that the engine use is specialized. 


2, Transmission and Torque converter used in SOCMA fork lifter, Adopts Hangchi ZF technology electronic control transmission. The torque converter is stable and reliable. The gearshift is smooth. It is a reliable transmission assembly after the testing of the market   


3, Driving axle of 32t material handler: SOCMA brand driving axle is designed with the same structure as Kessler. It is with first stage screw reducer and planetary driving wheel side reduction device. 

It is designed for special working condition of forklift. The wheel shell resistance strength is high.  It is with good supporting and good radiation. The driving axle is clamp disco brake, it is a high cost effectiveness driving axle with reliable performance and stable quality. 


4, Brake system of 32t handler: The forklift is with clamp-disc brake, the braking force is reliable and stable, booster pressure. The braking performance is reliable in any working condition, it is easy to maintain


5, Radiation system: Adopts 3-row water tank, with reliable quality and good radiation. The good radiation can guarantee that that all of the parts of different systems can work in good temperature condition, reduces the failure of the forklift, increase the reliable.  


6, Wheel system: Adopt GKN wheel rim and high-reliability non spoke plate structure, which can meet different heavy duty working condition. 


7, Chassis in SOCMA heavy duty forklift: Adopt double beam box-type chassis (same as konecranes).  The chassis is with good rigidity and strength, which guarantee the high performance of forklift chassis.  The chassis has been tested in the following aspects: Stiffness verification, strength testing, fatigue life-span assessment, with guidance by Chinese Academy of Sciences-Haixi Institute.  The FEA analysis is widely used, which help the optimization of structure design, guarantee the safety operation of the products  


8, Hydraulic system: Adopt domestic advanced hydraulic parts, with joy stick control as standard. 


9, SOCMA 32t counter balanced forklift standard configuration: with shock absorbing cab, hydraulic fork positioner, rear-view monitor, air conditioner and fan as standard configuration.  



Main specifications for  32t forklift

Configuration

Model

Unit

CPCD320

Vehicle configuration

HNF-320

Performance

Rated load


32000

Load center


1250

Mast tilt angle (front/rear)

º

6/12

Overall dimensions

Length

mm

9590

Width

mm

3200

Height

mm

3950

Mast lifting height

mm

3500

Fork size (L*W*H)

mm

2440X320X110

Min. turning radius

mm

7260

Max. travel speed (with load)

Km/h

24

Lifting speed (with load)

mm/s

260

Gradeability (with load)

%

20

Weight

Kg

41500

Tyre

Front


4X14.00-24-32PR

Rear


2X14.00-24-32PR

Wheel tread

Front

mm

2420

Rear

mm

2390

Wheelbase

mm

4800

Min. ground clearance

mm

350

DF Cummins Engine

Model


6CTA8.3-C260

Rated power/rotate speed

KW/r.pm

194/2200



8.3L


Use details of oil, fuel and cooling liquid for SOCMA heavy duty forklifts

2.1.2 Hydraulic transmission oil using in 32t diesel forklift

● Variable speed joystick in neutral position, pull the parking brake lever, block placed at the front

and back of tire

● Loosen the oil pan drain plug, found the old oil dirty, do not directly fuel, should open the oil pan,

clean the parts. If there are a lot of metal powder or debris, should contact our service personnel.

● Successively install the demolition of the pieces, adding a small amount of hydraulic transmission

oil, start the engine, idle for 10-30 seconds. Stop until the oil cools, the oil sump release, re-enter

the new oil.


2.1.3 Fuel oil using in forklift, 32t lifting capacity

● Fuel pump is a precision device, if the fuel is mixed with water or dirt, will not work.

● Do not remove the coarse filter of fuel tank when adding fuel, do not let things mixed with

impurities.

● Fuel at low temperature ≤ -15 ℃ will be below freezing, replace fuel according to the provisions

of this manual based on different ambient temperature.

● To prevent water vapor in the air condenses into water, into the fuel tank, work is completed, you

should fill the fuel.

● If you do not absorb fuel or have just changed the fuel filter, the loop should be excluded from the

air.


2.1.4 Cooling liquid of SOCMA 32t heavy duty forklift

● General use of rain water, tap water or clarified water as cooling water. Well water, spring water

contain more minerals, is easy to make the water chamber of diesel engines produce scale, affecting

the cooling effect caused by failure, it should not be used directly (can be precipitated by boiling

before use).

● If the engine overheated, add cooling liquid after engine coolant.

●Coolant to be added to the specified height, the cooling liquid is too low will result in engine

overheating and cooling system corrosion problems.

● Ambient temperature below 0 ℃, add antifreeze to the coolant. If there is no antifreeze in the

coolant, let out coolant after stopping, next time you start before rejoining.

● Antifreeze is flammable, add antifreeze to stay away from open flame.

● 100% antifreeze can not be directly used as a coolant ("WANRUNJIA brand" -35 antifreeze has

deployed, can be used directly).


2.1.5 Lubricating oil for diesel forklift

● Proper lubrication to reduce friction and machine parts wear, reduce noise, ensure the normal

operation of the machine, extended machine life.

● This manual is not involved in the connection body (such as connectors, connecting sets) usually

do not need to add oil, some parts of the prolonged use is not flexible, please add lubricating oil.


2.1.6 Oil plants storage

●Prevent water, dirt and other impurities mixed.

●Ensure the quality of long-term storage oil, should follow the FIFO principle.


2.1.7 Filter 

● Filter is an important safety component, to prevent oil, fuel, hydraulic oil, hydraulic transmission

oil impurities into the important device cause malfunction. Filter should be replaced regularly.

When the work environment has become more difficult, shorten the time interval to replace the

filter.

● Paper element filter can not be cleaned after use, the new filter should be replaced.

●Will not open the package of the new filter before use.

● To use the authentic filter accessories.

● Maintenance of diesel filter cleaning, see "engine use and maintenance manual."


Pictures of SOCMA 32t diesel forklift:

32t forklift

32t heavy duty forklift

forklift for heavy cargo handlingdiesel forklift32t forklift with 5500mm lifting

steering wheel for forklift

Inquiry