HNF-320
Rated load: 32,000 kgs
Load center:1250 mm
Operating weight: 41,000 kgs
Wheel base: 4,800 mm
1, No spokes plate type rim, increase the bearing capacity of hub. 2, use Hangchi, Sanchi planet type hydraulic power shift transmission, big traction in combined operating condition, the transmission system more reliable.
3, domestication parts, standardization, cost-effective, parts commonality good easy procurement, daily maintenance is simple and quick.
4, Variable speed control valve matched with neutral starter, the machine start more secure.
5, adopt Cummins, Weichai, Yuchai turbocharging engine, powerful, energy conservation, environmental protection, satisfies the requirement of high efficiency operation.
How to choose a suitable 32 Ton Forklift
Well, it's easy to choose one betweenthe electric pallet and the manual pallet.If you need handling frequency is high, and high working efficiency,I suggest you choose electric pallet, on the contrary choose manual pallet!Secondly, we should pay attention to the matching degree of pallet and fork, the weight of goods and the width of fork. The height of fork should be within the height of tray hole, otherwise it cannot be used!
If you use it to stack the goods!
You have a lot of options,you need to decide lifting height, use frequency, the weight ofcargo, width of fork. Remember when choice , you must start from your needs, not the higher the better, not the bigger the load the better.It is suitable for yourself and meet your needs,Otherwise, the pursuit of more functions and features the best forklift, undoubtedly the price is very high, but after buying back, most functions are abandoned in the state.
Consider the cost
Cost is the content which necessary to be considered.Buy forklift must have a budget or the bottom price in your heart.To ensure that the budget within the circumstances, from the following three principles: 1, forklift performance and forklift life; 2, forklift characteristics and advantages 3, the price of forklift.
Selection of parts!
In comparison with the parts, you need to list a table first, marked out which are essential and which are secondary, and then began to fork out the forklift style, it is best to choose the most suitable for your forklift, such as thesolid tires, 1.5M radius of the turn, etc.How important are they to your purchase of forklifts? It is necessary, or it is best to have, and these should be clearly defined.
Buy forklift, you need to find a forklift style, model more complete place to buy, so that there is relatively large room for purchase.For example, LTMA forklift has a good forklift style and model, as well as the after-sales service.So you through the above steps, it is easy to choose a suitable forklift for your own use!
Parameter of 32 Ton Forklift
Item | Item details | Unit | |
HNF-320 | |||
Features | Rated Load | Q(t) | 32 |
Load center | c(mm) | 1250 | |
Wheelbase | y(mm) | 4800 | |
Weight | Weight | kg | 40600 |
Chassis | Tyre Specs.:Front | 14.00-24-32PR | |
Tyre Specs.:Rear | 14.00-24-32PR | ||
Tyres Qty,front/rear(X-drive wheels) | 4\2 | ||
Wheel tread:Front | b10(mm) | 2420 | |
Wheel tread:Rear | b11(mm) | 2390 | |
Dimension | Mast/carriage tilt angle(front/rear) | Degree(°) | 6\12 |
Mast height(fork lowering) | h1(mm) | 3950 | |
Mast lifting height | h3(mm) | 3500 | |
Max.lifting height | h4(mm) | 5700 | |
Height to head guard(height to cab) | h6(mm) | 3800 | |
Overall height(with forks) | l1(mm) | 9590 | |
Fork front vertical surface to the rear end of the vehicle | l2(mm) | 7150 | |
Overall width | b1/b2(mm) | 3200 | |
Fork dimension | s/e(mm) | 2440X320X110 | |
Fork carriage width | b3(mm) | 3100 | |
Mast min ground clearance (with load) | m1(mm) | 350 | |
Wheelbase center min ground clearance(with load) | m2(mm) | 410 | |
Min.Turning radius | Wa(mm) | 7260 | |
Travel speed(with load/without load) | km/h | 24/28 | |
Performance | Max.lifting speed(with load/without load) | mm/s | 260/280 |
Max.Lowering speed(with load/without load) | mm/s | 250/180 | |
Traction | N | 22000 | |
Gradeablity(with load/without load) | % | 20/21 | |
Driving brake | Hydraulic clamp disc | ||
Engine brand/model | Optional one | Weichai engine | |
Engine | WO10G240E341 | ||
Optional two | Dongfeng Cummins | ||
QSC8.3-C260 | |||
Cylinder No. | 6 | ||
Others | Transmission gears(Front/rear) | 2\1 | |
Attachments working pressure | bar | 180 | |
Attachments using oil amount | l/min | 80 |