HNF-300
Rated load: 30,000 kgs
Load center:1250 mm
Operating weight: 40,000 kgs
Wheel base: 4,800 mm
1, adopt Cummins, Weichai, Yuchai turbocharging engine, powerful, energy conservation, environmental protection, satisfies the requirement of high efficiency operation.
2, use Hangchi, Sanchi planet type hydraulic power shift transmission, big traction in combined operating condition, the transmission system more reliable.
3, cooperate with hercynian institute of Chinese Academy of Sciences "overall structure optimization scheme", verifies the stiffness and strength calculation, fatigue life forecast on the forklift, comprehensive finite element mechanics analysis, structure design optimization, ensure the security of the products use
3.1, adopt long wheelbase, box double beam frame, can provide good rigidity and strength, to ensure the high reliability of forklift truck chassis
12.2, inner and outer mast adopt roller operate, the door frame with roller, movable block energy structure, long service life of the mast, high reliability
3.3, mast lifting height can be up to 3 meters, high mast, low mast, standard mast and a variety of accessories can be fitteed according to customers’ requirements
3.4, adopted quick hitch shelf, change quickly. Hydraulic fork positioner, easy to adjust. Cascade high strength fork, more wear-resisting, can multiply service life
4, rear axle by transverse hydraulic cylinder type steering, steering axle has compact structure, transmission angle is 70.5 °, help to reduce the resistance and reduce tire wear and improve the driving comfort
5, No spokes plate type rim, increase the bearing capacity of hub.
30 Ton Container Forklift maintenance 3
1、Inspect brake fluid and water volume, check the brake fluid whether in the scale range, check whether entrained air inside brake tube,prevent dust and water to enter when add brake fluid. Use the clean tap water when add water into the water tank.when the water temperature is higher 70℃,don’t open the water tank cover. When open the cover,use 1 piece thin cloth, don’t wear glove to twist the water tank cover.
2、Inspect oil volume of engine, hydraulic oil, transmission oil, gear oil and water.firstly pull out engine oil scaleplate,wipe out the head of scaleplate, then insert and pull out to check whether oil level is in the range of scale mark. The oil level should be in the range of scale mark. If oil is too little, will entrained air into the pipeline and overflow from the cover.
Parameter of 30 Ton Container Forklift
Item | Item details | Unit | |
HNF-300 | |||
Features | Rated Load | Q(t) | 30 |
Load center | c(mm) | 1250 | |
Wheelbase | y(mm) | 4800 | |
Weight | Weight | kg | 40000 |
Chassis | Tyre Specs.:Front | 14.00-24-32PR | |
Tyre Specs.:Rear | 14.00-24-32PR | ||
Tyres Qty,front/rear(X-drive wheels) | 4\2 | ||
Wheel tread:Front | b10(mm) | 2420 | |
Wheel tread:Rear | b11(mm) | 2390 | |
Dimension | Mast/carriage tilt angle(front/rear) | Degree(°) | 6\12 |
Mast height(fork lowering) | h1(mm) | 3950 | |
Mast lifting height | h3(mm) | 3500 | |
Max.lifting height | h4(mm) | 5700 | |
Height to head guard(height to cab) | h6(mm) | 3800 | |
Overall height(with forks) | l1(mm) | 9590 | |
Fork front vertical surface to the rear end of the vehicle | l2(mm) | 7150 | |
Overall width | b1/b2(mm) | 3200 | |
Fork dimension | s/e(mm) | 2440X320X110 | |
Fork carriage width | b3(mm) | 3100 | |
Mast min ground clearance (with load) | m1(mm) | 350 | |
Wheelbase center min ground clearance(with load) | m2(mm) | 410 | |
Min.Turning radius | Wa(mm) | 7260 | |
Travel speed(with load/without load) | km/h | 24/28 | |
Performance | Max.lifting speed(with load/without load) | mm/s | 260/280 |
Max.Lowering speed(with load/without load) | mm/s | 250/180 | |
Traction | N | 22000 | |
Gradeablity(with load/without load) | % | 20/21 | |
Driving brake | Hydraulic clamp disc | ||
Engine brand/model | Optional one | Weichai engine | |
Engine | WO10G240E341 | ||
Optional two | Dongfeng Cummins | ||
QSC8.3-C260 | |||
Cylinder No. | 6 | ||
Others | Transmission gears(Front/rear) | 2\1 | |
Attachments working pressure | bar | 180 | |
Attachments using oil amount | l/min | 80 |