Strong points of SOCMA 25tons Forklift for container stacking:
1, The thermal balance temperature of the engine and transmission is good: The engine water thermal balance temperature will keep 105℃ below, transmission oil thermal balance temperature will keep 90℃ under the environmental working temperature of 40℃, which can solve the problem of oil-leakage, water-leakage causing by aging of seal, and other failure such as engine early wearing, power transmission failure.
2, Optimized mast design, with wide view: Optimized mast with small clearance, compact structure, which provides wide front view for the operator. It is good for safe-working improvement and the increasing of the work efficiency.
3, Good cost effectiveness and stable performance: China Domestic configuration with the same performance of imported configuration, with good feedback after launching into the market
Main Specifications for 25T Forklift for stacking containers
Configuration | Model | Unit | CPCD250 | |
Vehicle configuration | HNF-250 | |||
Performance | Rated load | 25000 | ||
Load center | 1250 | |||
Mast tilt angle (front/rear) | º | 6/12 | ||
Overall dimensions | Length | mm | 9190 | |
Width | mm | 3050 | ||
Mast lifting height | mm | 5500 | ||
Fork lowered height | mm | 4800 | ||
Fork raised height | mm | 7550 | ||
Fork size (L*W*H) | mm | 2440X300X110 | ||
Min. turning radius | mm | 6700 | ||
Max. travel speed (with load) | Km/h | 25 | ||
Lifting speed (with load) | mm/s | 260 | ||
Gradeability (with load) | % | 20 | ||
Weight | Kg | 35000 | ||
Tyre | Front | 4X14.00-24/28PR | ||
Rear | 2X14.00-24/28PR | |||
Wheel tread | Front | mm | 2200 | |
Rear | mm | 2390 | ||
Wheelbase | mm | 4400 | ||
Min. ground clearance | mm | 300 | ||
DF Cummins Engine | Model | 6CTA8.3-C240 | ||
Rated power/rotate speed | KW/r.pm | 179/2200 | ||
No. of cylinder | 6 |
Working pictures of 25t diesel forklift