18 Tons 18t Heavy Forklift FD180

18 Tons 18t Heavy Forklift FD180

Email: claire@socmachinery.com 18 tons 18t heavy forklift FD180 HNF-180 Rated load: 18,000 kgs Load center: 900 mm Operating weight: 25,500 kgs Wheel base: 3,800 mm
Chat Now

Product Details

  Email: claire@socmachinery.com


18 tons 18t heavy forklift FD180


The spring of new year, with the temperature rise and the progress of the project started, forklifts will be a heavy load period after experiencing the winter. In this period, it is necessary to check and maintenance forklifts.

Body paint

It is necessary to clean the body regularly after a dry, dusty, snowmelt and long-term use. Alternating cold and warm, the body of the paint is prone to change, if you have some bumps in your use, it is easy to be painted. In addition, more rain in the spring, the rain of acidic substances will damage the forklifts’ paint and body. In the use of forklifts, the body should be checked regularly whether the paint, body be damaged. If this happened, please fill the paint as soon as possible to prevent the depth of corrosion, the damage to the vehicle structure and the effect of performance.

Chassis

After a long period of winter after use, you should carefully check whether the forklift chassis be damaged. If it is damaged, it should be  repairtimely, and do the good job for anti-rust seal work.


18 tons 18t heavy forklift FD180

Wipers

If your forklift products have a closed cab and equipped with wipers, after summer, autumn and winter triples, sun exposure, rain and snow erosion, wind and frost low temperature, easy to make the wipers of the tape aging, to cause the wiper to fail to properly clean the rain on the windshield. Before the spring comes, we have to check the wiper as soon as possible, first check whether the wiper can work properly, then check whether the wiper tape need to be replaced. If the wiper can not work properly, it is necessary to replace the wiper assembly. If you find the wiper can not completely clean up rainwater, it is necessary to replace the wiper bar. In addition, the doors, windows of the sealing tape should also be cleaned and maintained.

Tires

About the tire inspection, we mainly check on the tire pattern wear, tire pressure. You should check whether the nut is loose or not, and clean the stones and other debris in the gap, so that the service life of the tyre can be effectively prolonged. If driving feels that there is a deviation or a swing, you should go to the service station for four wheel alignment or dynamic balance check. In addition, the use of overload will cause serious damage to the tire, please note that the safety of use.


18 tons 18t heavy forklift FD180

Oil

About oil inspection let me introduce for you. Use the oil caliper to determine how much oil you need and whether or not you need it. Then apply a small amount of oil to the white paper on the oil gauge and judge the quality of the oil by color. If the color is tan, you have to replace the oil; if the color is yellow, and good liquidity, you do not need to replace.

Coolant fluid

Spring temperatures gradually picked up, and some friends found water tank in the cooler, you should use clear water to replenish. At this time the vehicle antifreeze is not the theme, but the water is easy to produce water alkali, rust, and low boiling point, easily lead to "boil."Therefore, the coolant can not be changed into clean water at your willing.


18 tons 18t heavy forklift FD180

Battery

For electric forklift batteries, we mainly check whether the positive and negative pole posts loose, corrosion. It is to ensure that it doesn't break. In addition, please check, add battery electrolyte, to ensure the normal use of the battery in time. Specific practices please refer to Dalian forklift topic about the "battery forklift maintenance" .

Harness

Please double check the connection of the whole car harness, whether there are wireless skin cracking, loose, poor contact and so on.


Email: claire@socmachinery.com


ItemItem details Unit 
HNF-180
 FeaturesRated LoadQ(t)18
Load centerc(mm)900
Wheelbasey(mm)3500
WeightWeightkg26000
ChassisTyre Specs.:Front
12.00-24-18PR
Tyre Specs.:Rear
12.00-20-18PRR
Tyres Qty,front/rear                                            (X-drive wheels)
4\2
Wheel tread:Frontb10(mm)2060
Wheel tread:Rearb11(mm)2330
DimensionMast/carriage tilt angle(front/rear)Degree(°)6\12
Mast height(fork lowering)h1(mm)3625
Mast lifting heighth3(mm)3500
Max.lifting heighth4(mm)5375
Height to head guard                       (height to cab)h6(mm)3365
Overall height(with forks)l1(mm)7640
Fork front vertical surface to the rear end of the vehiclel2(mm)5840
Overall widthb1/b2(mm)2750
Fork dimensions/e(mm)1800X200X100
Fork carriage widthb3(mm)2380
Mast min ground clearance               (with load)m1(mm)265
Wheelbase center min ground clearance(with load)m2(mm)325
Min.Turning radiusWa(mm)5800
Travel speed                                               (with load/without load)km/h26/30
PerformanceMax.lifting speed                                           (with load/without load)mm/s250/260
Max.Lowering speed                             (with load/without load)mm/s430/330
TractionN15000
Gradeablity                                                    (with load/without load)20/21
Driving brake
       Hydraulic clamp disc

Engine  brand/modelOptional one              Yuchai engine
Engine
 YC6J175-T302
6.494L 129KW 2200rpm
Optional two       Dongfeng Cummins

  QSB6.7-C190
6.7L 142KW 2200rpm
Cylinder No.6
OthersTransmission gears(Front/rear)
2\1
Attachments working pressure bar160
Attachments using oil amountl/min60


Inquiry