25t CVT forklift

25t CVT forklift

HNF-250CVT Rated load: 25,000 kgs
Load center: 1250 mm
Operating weight: 35,000 kgs
Wheel base: 4,000 mm
1, adopt Cummins, Weichai, Yuchai turbocharging engine, powerful, energy conservation, environmental protection, satisfies the requirement of high efficiency operation. 2, With CVT...
Chat Now

Product Details

HNF-250CVT 

Rated load: 25,000 kgs

Load center: 1250 mm 

Operating weight: 35,000 kgs 

Wheel base: 4,000 mm   


Parameter of 25t CVT forklift                

ItemItem details  Unit 
HNF-250CVT
FeaturesRated   LoadQ(t)25
Load centerc(mm)1250
Wheelbasey(mm)4400
WeightWeightkg35000
ChassisTyre   Specs.:Front
14.00-24-28PR
Tyre Specs.:Rear
14.00-24-28PR
Tyres Qty,front/rear(X-drive wheels)
4\2
Wheel tread:Frontb10(mm)2200
Wheel tread:Rearb11(mm)2390
DimensionMast/carriage   tilt angle(front/rear)Degree(°)6\12
Mast height(fork lowering)h1(mm)3860
Mast lifting heighth3(mm)3500
Max.lifting heighth4(mm)5610

Height to head guard

(height to cab)

h6(mm)3510
Overall height(with forks)l1(mm)9190
Fork front vertical surface to the rear end of   the vehiclel2(mm)6745
Overall widthb1/b2(mm)3050
Fork   dimensions/e(mm)2440X300X110
Fork carriage widthb3(mm)3060

Mast min ground clearance

(with load)

m1(mm)300
Wheelbase center min ground clearance(with   load)m2(mm)420
Min.Turning radiusWa(mm)6700

Travel speed

(with load/without load)

km/h25/29
 Performance

Max.lifting   speed

(with load/without load)

mm/s260/270

Max.Lowering speed

(with   load/without load)

mm/s315/260
TractionN17000

Gradeablity

(with load/without load)

20/21
Driving brake Hydraulic clamp disc

Engine  brand/modelOptional   oneWeichai   engine
Engine WP10G220E343
9.726L 162KW 2000rpm
Optional twoDongfeng   Cummins

QSC8.3-C240
8.3L 179KW 2200rpm
Cylinder No.6
OthersTransmission   gears CVT  
Attachments working pressure bar180
Attachments using oil amountl/min80

1, adopt Cummins, Weichai, Yuchai turbocharging engine, powerful, energy conservation, environmental protection, satisfies the requirement of high efficiency operation. 
2,  With CVT transmission, the gear shift is more smoothly, and it is energy saving 

3, adopt double turbine hydraulic torque converter, stepless speed change, single lever control for the speed changing, easier for operation.
4, Variable speed control valve matched with neutral starter, the machine start more secure.
5, front axle adopt heavy duty type driving axle, enlarge size of axle housing, hub and bearing, spiral bevel gear and wheel planetary wheel deceleration increasing twist, steel structure bridge shell support, increase the load capacity and service life.
6, No spokes plate type rim, increase the bearing capacity of hub.
7, rear axle by transverse hydraulic cylinder type steering, steering axle has compact structure, transmission angle is 70.5 °, help to reduce the resistance and reduce tire wear and improve the driving comfort. 
8, using four heavy caliper disc brake, thicken brake disc, the rear air tank, 18 times braking pressure strength ratio, heat dissipation faster, reliable and safe operation
9, hydraulic load sensing steering system, rear steering axle with small turning radius, flexible and light steering
10, adopt double pump confluence working hydraulic system, greatly reduce fuel consumption, energy consumption. Hydraulic system equipped with oil radiator and back pressure protection device, ensure the machine heat balance
11, using speed limit valve and pressure selector valve, reduce the hydraulic system impact, can lower the mast to the ground when engine flame out
12, cooperate with hercynian institute of Chinese Academy of Sciences "overall structure optimization scheme", verifies the stiffness and strength calculation, fatigue life forecast on the forklift, comprehensive finite element mechanics analysis, structure design optimization, ensure the security of the products use 
12.1, adopt long wheelbase, box double beam frame, can provide good rigidity and strength, to ensure the high reliability of forklift truck chassis
12.2, inner and outer mast adopt roller operate, the door frame with roller, movable block energy structure, long service life of the mast, high reliability
12.3, mast lifting height can be up to 3 meters, high mast, low mast, standard mast and a variety of accessories can be fitteed according to customers’ requirements
12.4, adopted quick hitch shelf, change quickly. Hydraulic fork positioner, easy to adjust. Cascade high strength fork, more wear-resisting, can multiply service life 
13, with massive deepen heavy forklift tire, rear steering axle can swing around the center, have good traction performance and passing performance.
14, matched with adjustable direction, airline seats, joystick control distributing valve and working device, flexible and convenient manipulation  
15, using domestic high quality electrical components, maintenance-free battery, the wire resistance of flame retardant materials, reliable and durable. Cabin matched wiht fan, radios, air conditioner, reversing display, can match with weighting machine according to customers’ requirements.
16, the whole machine is beautiful and smooth. Luxury wide view cabin, along with the skylight, low noise, good sealing
17, domestication parts, standardization, cost-effective, parts commonality good easy procurement, daily maintenance is simple and quick.
18. widely used in airports, ports, docks, stations, warehouses and other big working intensity occasions for loading and unloading, stacking and short-distance transportation

25t CVT forklift

25t CVT forklift

25t CVT forklift



Inquiry