Slagging Truck

Slagging Truck

This product is designed for the cleaning of slag which are generated in the smelting and holding furnaces during the metal smelting process. HNBZ8512 is a multipurpose wheel type telescopic slagging truck, with three-section telescopic boom, the maximum lifting height 3200mm, the slag power is...
Chat Now

Product Details

This product is designed for the cleaning of slag which are generated in the smelting and holding furnaces during the metal smelting process.

HNBZ8512 is a multipurpose wheel type telescopic slagging truck, with three-section telescopic boom, the maximum lifting height 3200mm, the slag power is biggerr than 10KN, the maximum extension distance 8500mm, all the slag action is operated through hydraulic pilot. It is very suitable for smelting furnace and holding furnace slag, stirring and clearing furnace.
1, Adpot Donefeng CUMMINS  turbocharge diesel engine, China stage III emissions, power strong, energy saving and environmental protection, meet the efficient working requirements.
2, Adpot fixed - shaft type hydraulic transmission, the traction force of the combined condition is large, and the double-variable system is more reliable. Twin-turbo hydraulic torque converter stepless speed change; single-lever control transmission system, two forward and two backward gear shift, operation is easier.
3, Adopt dual-pump confluence working hydraulic system, a significant reduction in fuel consumption and energy consumption.
4, Adopt full hydraulic coaxial flow amplification steering system, the turning radius of rear axle is small, steering light and flexible.
5, Adopt front wheel drive, rigid suspension, rear axle steering structure. The front axle spiral bevel gear and the wheel side planetary gear increase toqrue, big load capacity. The rear axle adopts the transverse hydraulic cylinder type steering mechanism, which is helpful to reduce the steering resistance, reduce the tire wear and improve the ride comfort.

Slagging Truck

Slagging Truck

Slagging Truck

Slagging Truck


Parameter of Slagging Truck

Performance

Specifications

Basic parameter

Overall width(The boom is fully retracted)

7100 mm

Basic boom length

4490 mm

Max. boom length(Fully extended)

13000 mm

Width

2340 mm

Height

Cab height

2360 mm

Height when the boom fully extended

3200 mm

Min. ground clearance

160 mm

Max. extension

8600 mm

Min. extension

2600 mm

Wheelbase

3000 mm

Wheel tread

Front

1640 mm

Rear

1630 mm

Min. outside turning radius≤105%

7000 mm

Approach angle

20 °

Departure angle

15 °

Range elevation

Max. elevation angle of boom

7 °

Min. elevation angle of boom

-12 °

Truck weight

11000 kg

Slag removing force

Level≥90%

10 kN

Vertical≥90%

10 kN

Engine

Model

QSB3.9-C100-31

Rated power/rotate speed

74kW/2400 rpm

Max. torque/rotate speed

330N.m/1400~1600 rpm

Transmission system

Transmission way

Power shift, fixed-axis type, hydraulic transmission

Gear (forward / backward)

2月2日

Max. travelling speed

28km/h

Max. drawbar pull≥90%

30kN

Gradeability

15%

Oil tank capacity

Hydraulic oil tank capacity

230L

Fuel oil tank capacity

230L

Brake system

Parking brake

Hand expanding shoe type brake

Service brake

Gas cap oil brake

Brake system air pressure

0.684-0.785 MPa

Hydraulic system

Hydraulic system pressure

18MPa

Joystick system pressure

0.30MPa

Extend / retract speed

1150/1100 mm/s

Up / down speed

3/3°/s

Steering system

Steering type

Fully hydraulic load sensing steering system

System pressure

14MPa

Tyre

Front tyre (front tyre 4, solid tyres)

8-20

Rear tyre (rear tyre 2, solid tyres)

8-20




Inquiry