Electric-hybrid Forklift Trucks 25 Ton HNF-250EE

HNF-250EE Electric-hybrid Forklift Trucks have changed the traditional type of diesel engine as the main source of power for the engine. Lithium batteries are used as the main source of power and small duty diesel engine as additional power. low emissions, low pollution, low noise, low energy consumption to achieve environmental protection requirements for national energy conservation and emission reduction.

Product Details

HNF-250EE Electric-hybrid Forklift 25 ton(25000kg)


HNF-250EE Electric-hybrid Forklift Trucks have changed the traditional type of diesel engine as the main source of power for the engine. Lithium batteries are used as the main source of power and small duty diesel engine as additional power. low emissions, low pollution, low noise, low energy consumption to achieve environmental protection requirements for national energy conservation and emission reduction.


HNF-250EE Electric-hybrid Forklift Trucks carrying capacity is 25tons, can be a good alternative generation of conventional diesel heavy-duty trucks, mainly used to pallets and containers loading & unloading, transporting, etc. in ports, railway stations, airports, yard, factory workshops, warehouses, distribution centers, vessels. Different working devices such as stacking, overturning, and roll prong can be used for loading, unloading, stacking and short-distance transportation in situations.

Features

Product Description:

1. Adopting SOCMA motor and matching lithium battery in CATL, energy saving and environmental protection, the power system is optimized to meet the requirements of efficient operation.

2. Reduce energy consumption of the whole machine by means of walking braking energy recovery.

3, the whole machine protection grade IP67, motor has eight years warranty, the battery canbe fully charged and discharged for more than 4,000 times, with high reliability and long service life.

4 , Hydraulic system

a, using full hydraulic load sensing steering gear, high and low speed steering performance is consistent, light and flexible operation, straight line driving;

b, using internal gear pump, double pump confluence working hydraulic system , priority valve steering, high efficiency and energy saving;

c. The hydraulic system is equipped with oil return radiator and back pressure protection device to ensure the heat balance of the whole machine;

d . Increase the coaxial connection between the pump motor and the traveling motor to drive the gearbox. When the fork is installed, increase the explosive force of the whole machine.

5 , the use of long wheelbase, box-shaped double beam frame, can provide good rigidity and strength, to ensure the high reliability of the forklift chassis.

6, the mast standard lifting height is 3.5 meters, high mast, low type, duplex, triplex, free lift mast may be available.

A . mast lower using the pressure selector valve and the speed limited valve, when the motor is turned off, the mast can be lowered from the height to the ground;

b . The inner and outer mast adopts the roller matching and the movable pulley structure to save the power, and the mast has a long service life and high reliability.

7, using quick-change carriage, hydraulic fork positioner, can be quick in replacement and adjustment.

 8, Cascade fork, high strength, more wear-resistant, can double the life.

9, the use of heavy forklift drive axle, two-stage planetary deceleration and twisting, big load capacity, long service life.

10. The rear axle adopts a horizontal hydraulic cylinder type steering mechanism, and the transmission angle can reach 70.5, which improves the drive smoothness.

11. Select heavy forklift tires, and the rear steering axle can swing around the center, with good traction performance and passing performance.

12 , using a wet-type hydraulic brake, safe and reliable operation.

13 ,Using domestic high-quality electrical components, the wires are made of anti-flame retardant materials, and the work is reliable and durable.

14 , electronic monitoring system: multi-function LCD monitor, comprehensive monitoring of the working state of the forklift (oil pressure, air pressure, water temperature, etc.).

1 5 , the whole machine is shaped to be atmospheric, beautiful and smooth; the luxurious wide-view cab is equipped with air conditioning and good sealing, which is convenient for the driver to observe around .

25 ton electric-hybrid forklift 


25 ton electric-hybrid forklift truck


25 ton Electric-hybrid Forklift TrucksPerformance parameters:

performance

parameter

Basic parameters

power consumption

10-15degrees / hour (depending on   working conditions)

Ratedliftingcapacity

25000kg

Load center

1250mm

Machine operating weight

35000kg

Standard liftingheight

3500mm

Standard front/rear mast tilting angle

6/12

Transmission system

transfer method

Mechanical transmission

Transmission gears

Forward2/ Reverse1

Driving speed (load / no load)

25/29km/h

Gradelibility 

20%

Traction

170kN

Travel motor parameters

Motor type

Permanent magnet synchronous motor

Motorratedpower

45kW

Motor operating efficiency interval

86%-98%

Main pump motor parameters

Motor type

Permanent magnet synchronous motor

Motorratedpower

30kW

Motor operating efficiency interval

86%-98%

Battery parameter

type of battery

Lithium iron phosphate

Battery rated storage energy

109.3Kwh

Battery rated capacity

202AH

Voltage

541V

Fullcharge and discharge cycles

Morethan4000 times

Theoretical service life

>8 years

Charging time

0.6-1.5h(depending on the charging   pile)

Hydraulic system

pressure

20MPa

flow

250L/min

Max.liftingspeed(load/no load)

260/270 mm/s

Max. lowering speed(load/no load)

315/260 mm/s

steering system

Steering geartype

TLF1-E1000C

pressure

14MPa

Steering mode

Tap-typecylindersteering

Steering angle

35

Braking method

Service brake

Wettypehydraulicbrake

Parking brake

Wettypehydraulicbrake

Main dimensions

Machine height

3510mm

Machine width

3050mm

Machine length

9190mm

Wheelbase

4400mm

Track(front/rear)

2200/2390mm

Fork size

2440300110mm

Ground clearance

300mm

Turning radius (outside)

6700mm

Driving position

central area


Seat mode

Driver type


Standard tire(inflatable)

Number of wheels

front4/rear2

Number of driving wheels

Front-wheel drive

Tire size

14.00-24-28PR


performance

parameter

Basic parameters

power consumption

10-15degrees / hour (depending on   working conditions)

Ratedliftingcapacity

25000kg

Load center

1250mm

Machine operating weight

35000kg

Standard liftingheight

3500mm

Standard front/rear mast tilting angle

6/12

Transmission system

transfer method

Mechanical transmission

Transmission gears

Forward2/ Reverse1

Driving speed (load / no load)

25/29km/h

Gradelibility 

20%

Traction

170kN

Travel motor parameters

Motor type

Permanent magnet synchronous motor

Motorratedpower

45kW

Motor operating efficiency interval

86%-98%

Main pump motor parameters

Motor type

Permanent magnet synchronous motor

Motorratedpower

30kW

Motor operating efficiency interval

86%-98%

Battery parameter

type of battery

Lithium iron phosphate

Battery rated storage energy

109.3Kwh

Battery rated capacity

202AH

Voltage

541V

Fullcharge and discharge cycles

Morethan4000 times

Theoretical service life

>8 years

Charging time

0.6-1.5h(depending on the charging   pile)

Hydraulic system

pressure

20MPa

flow

250L/min

Max.liftingspeed(load/no load)

260/270 mm/s

Max. lowering speed(load/no load)

315/260 mm/s

steering system

Steering geartype

TLF1-E1000C

pressure

14MPa

Steering mode

Tap-typecylindersteering

Steering angle

35

Braking method

Service brake

Wettypehydraulicbrake

Parking brake

Wettypehydraulicbrake

Main dimensions

Machine height

3510mm

Machine width

3050mm

Machine length

9190mm

Wheelbase

4400mm

Track(front/rear)

2200/2390mm

Fork size

2440300110mm

Ground clearance

300mm

Turning radius (outside)

6700mm

Driving position

central area


Seat mode

Driver type


Standard tire(inflatable)

Number of wheels

front4/rear2

Number of driving wheels

Front-wheel drive

Tire size

14.00-24-28PR


Hot Tags: electric-hybrid forklift trucks 25 ton hnf-250ee, China, manufacturers, factory, customized
electric-hybrid-forklift-trucks-25-ton

Inquiry

You Might Also Like