Electric Heavy Duty Forklift 25 Ton

Electric Heavy Duty Forklift 25 Ton

Innovation: 1. It is not just a simple replacement of the diesel engine with a motor, but the hydraulic system is thoroughly optimized. 2. Self-developed load-sensing dedicated control system with variable speed, large closed-loop feedback of hydraulic parameters, torque prediction and direct torque control, global power matching, on-demand oil supply, reduced throttling and overflow losses. 3. Multi-motor coordinated control, reasonable matching of motor load, optimized energy management, efficient operation; time-sharing, automatic idle stop, reducing energy consumption of motor and pump idle. 4. 540V high voltage solution, reduce electric current; high efficiency permanent magnet synchronous motor, intelligent door drive variable speed control, low heat generation, 20% energy saving than asynchronous motor. 5. Regenerative power generation for various negative loads, based on energy recovery of power lithium batteries, to improve energy efficiency of the whole machine.

Product Details

Electric heavy duty forklift 25 ton Main feature:

1.  economic:

l Low cost of use: The cost of electricity is about 20~30% of the cost of traditional engineering machinery.       

l Low maintenance cost: less wearing parts, low failure rate and simple maintenance; no need for regular maintenance of diesel engine, replacement of oil, filters, etc., maintenance cost is more than 50% lower than traditional diesel engineering machinery.       

微信图片_20190915143157


2,The battery system is safe, high-efficiency, long-life, and can be used normally for 8 to 10 years to solve the pain points that users care about .

llithium iron phosphate battery, it has good thermal stability and solves the risk of spontaneous combustion or deflagration caused by thermal runaway. The safety is better than that of ternary lithium battery.       

lLithium iron phosphate battery has a deep charge and discharge frequency of more than 4,000 times, and the service life is about 2.5 times of a ternary lithium battery, and 5 to 10 times of a lead-acid battery.       

lAdvanced battery management system (BMS), real-time security monitoring of overcharge, over discharge, over electric current, insulation resistance and battery operating temperature, ensuring the safety, efficiency and longevity of each battery.   


微信图片_20190915143044


3,Reliable high performance

lElectric vehicle grade motor and controller, vehicle component status monitoring, electrical system IP67 protection grade, high quality, mature hydraulic parts, flame retardant material wire, reliable and durable, adapt to harsh working environment.       

lIntelligent electronic fan, high-efficiency liquid cooling system to prevent overheating and shutdown.       

l battery comes with a heating film and works normally in the environment of -30~+55°C (-22°F~131°F).       

lFully electronically controlled operation of the working device, multi-mode switching, safer when handling precise equipment; independent motor drive, electronic throttle system, automatic shifting multi-speed gearbox, taking into account various working conditions . 


4,Strong endurance

lIndependent research and development of the whole machine drive scheme and integrated management control system, hydraulic system distributed multi-motor, high-efficiency interval operation, travel brake kinetic energy, cargo decline potential energy recovery and regenerative power generation, under the same conditions, significantly reduce power consumption and improve endurance.       

l218kwh large capacity lithium battery, charging 1.5~2 hours, continuous work for 8 hours.       


5.  Comfortable and environmentally friendly

lZero emissions, zero pollution: no emissions during driving and working.       

lLow noise: The motor produces much less noise than the high-power diesel engine of the construction machinery.       

lLow vibration: The vibration generated by the motor is much lower than that of the diesel engine, which significantly improves the driving experience.       

lEasy to operate: intelligent, full electronic control system to reduce labor intensity.       




performance



parameter

Basic parameters

1.2

Model

HNF250-EL

1.3

Dynamic form

Lithium battery pure electric

1.4

Seat mode

Driver type

1.5

Rated lifting capacity

25,000kg

1.6

Load center

1,250mm

1.9

Wheelbase

4,400mm

Weight

2.1

Machine weight

35,000kg

Wheel, chassis

3.1

Tire form

Inflatable

3.2

Front wheel

14.00-24-28PR

3.3

Rear wheel

14.00-24-28PR

3.5

Number of wheels front/rear (x=drive wheel)

4x/2

3.6

Front track

2200 mm

3.7

Rear track

2390 mm

basic size

4.1

Standard front/rear mast tilting angle

6 ° / 12 °

4.2

Mast height when fork lowered

3,860mm

4.4

Standard lifting height

3,500mm

4.5

Maximum height when fork raised

5,610 mm

4.7

Cab height

3,510mm

4.19

Machine length (including standard fork)

9,190mm

4.20

Length without fork

6,745 mm

4.21

Machine width

3,050mm

4.22

Fork size

2,440 × 300 × 110mm

4.24

Fork carriage width

3,050mm

4.25

Fork opening

560-2,380mm

4.31

Ground clearance in mast

300mm

4.32

Ground clearance in center of wheelbase

420mm

4.35

Turning radius (outside)

6,700 mm

performance

5.1

Driving speed (load / no load)

28 km/h

5.2

Maximum lifting speed (load / no load)

290/300mm/s

5.3

Maximum lowering speed (load / no load)

315/260mm/s

5.5

Traction

170kN

5.7

Gradeability

20%

5.10

Service brake

Dry caliper / wet multi-piece (optional)


Parking brake

Clamp disc spring brake

Battery parameter


type of battery

Lithium iron phosphate


Battery rated storage energy

218kwh


Battery rated capacity

404AH


Voltage

541V


Full charge and discharge cycles

More than 4000 times


Theoretical service life

>8 years


Charging time

1.5-2h (depending on the charging pile)


Power consumption

25kwh / hour

Drive System


Motor type

Permanent magnet synchronous motor


Motor rated power

90kW

8.1

Transmission type

Mechanical transmission, automatic shifting

Hydraulic system


Motor type

Permanent magnet synchronous motor


Motor rated power

Distributed multi-motor


Pressure

20 MPa

steering system


Steering type

Full hydraulic steering


Pressure

14 MPa


Steering mode

Horizontal cylinder steering

SOCMA 25 ton electric forklifts,contact me for more information

emma@socmachinery.com


Hot Tags: electric heavy duty forklift 25 ton, China, manufacturers, factory, customized

Inquiry

You Might Also Like